“AERIAL CUBE & SILK” (aerial performance)
- A prerequisite is an individual fixed/solid suspension point (e.g. beams, trusses, cranes…).
- The minimum/maximum load of the suspension point should be approximately 150/200KP.
- The minimum height is at 6m (measured from the edge of the stage!). (Optimal 8m)
- Minimum 4x4m free space on the floor/stage. (Optimal 5m)
- Stage/tread surface should be clean, free and non-slip (a special stage is not required!)
- The power requirement for the motor is 16Ã/380V-5 poles.
“LIGTHING CUBE” (ground performance)
- Minimum 5x5m free space on the floor/stage.
- Minimum 4,70m height. (measured from the edge of the stage!)
- Stage/tread surface should be clean, free and non-slip (a special stage is not required!)
“PYRA-LASER PYRAMID” (ground performance)
- Minimum 5x5m free space on the floor/stage.
- Minimum 4,30m height. (measured from the edge of the stage!)
- Stage/tread surface should be clean, free and non-slip (a special stage is not required!)
- Fog machine(s) are a prerequisite for the implementation of the laser highlights.
Generally:
Depending on the show(s), the organizer must also provide a lift/ladder and other tools that are important for the construction as well as extension cables! And:
- Lighting system (agreements on this are dependent on the show(s) and scope!)
- Music system (CD, USB)
- Fog machine(s)/hazer (depending on the show)
- Clean, non-slip and free stage/tread area!
- Wardrobe/locker room (clean, comfortable temperature and if possible lockable, due to the storage of the equipment/costumes, as well as with direct washing/toilet, including enough seating, table and wardrobe stand for costumes, enough power connections and WLAN, if possible)
- Technical and personal contact on site
- Test run per presentation (adaptation of local conditions at the venue, in mutual agreement with the technical team.)
Changes to the technical requirements are reserved, depending on individual inquiries!